Name : YH380LC-9
Category : Crawler Excavator
HOT LINE:
WhatsApp: 86 18660075959
Email: james@yoohooglobal.com
GET A QUOTE
Details
| Engine | |
| Model | Isuzu-6HK1 |
| Type | Four-stroke、Water-cooled、In-line |
| Air intake | Turbocharged、Intercooler |
| Cylinder number | 6 |
| Cylinder | 115mm |
| Piston | 125mm |
| Displacement | 7.79L |
| Rated power/speed | 212kW /2000 r/min |
| Hydraulic system | |
| Main pump | |
| Type | Variable plunger pump |
| Maximum flow | 2*282L/min |
| Hydraulic motor | |
| Walking motor | Axial plunger type*2 |
| Rotating operation braking | Wet multi -disc brakes |
| Safety valve setting value | |
| Working device hydraulic circuit | 350kfg/cm²(34.3Mpa) |
| Walking liquid pressure circuit | 350kfg/cm²(34.3Mpa) |
| Rotating liquid pressure circuit | 295kfg/cm²(28.9Mpa) |
| Rotary system | |||
| Drive method | Deceleration | Rotary operation braking | spinning speed |
| Hydraulic drive | Planet gear deceleration | Wet multi -disc brakes | 8.2rpm |
| Drive device and brake | |
| Steering control | Footprint and control rod integrated control |
| Drive method | Hydraulic drive |
| Walking motor | Axial plunger hydraulic motor |
| Walking speed (fast/slow) | 4.9/2.9km/h |
| Operating brake | Hydraulic suppression |
| Parking brake | Wet multi -disc brakes |
| Walking part | |||
| Curve seal | Track adjustment (high/low) | Number of tracked boards | Rollers |
| Self -lubricating track | Butter tighten | 2*52 | 2*9 |
| Filling capacity | |||||
| Fuel tank | Hydraulic tank | Heat sink | Engine | Walking deceleration gear oil | Rotation reducer |
| 500L | 280L | 45L | 36L | 2*5.5L | 1*7L |
| Working weight | |||||||
Standard configuration | Maximum excavation | Tank | |||||
| Armor | 6500mm | Bucket | 26ton(254.8kN) | Armor | 2-140mm*95mm*1450mm | ||
| Stick | 2900mm | ||||||
| Bucket | 1.8m³ | Stick | 1-150mm*105mm*1670mm | ||||
| Width | 600mm | Stick | 20.4ton(200.0kN) | ||||
| Work weight | 37.65ton | Bucket | 1-135mm*90mm*1150mm | ||||
| Ground pressure | 0.69kg/cm² | ||||||
Technical parameters
| Technical parameters | |||
| Armor | （mm） | 6500 | |
| Stick | （mm） | 2900 | |
| Bucket | （m³） | 1.8 | |
| Tail turning radius | （mm） | N | 3530 |
| Transportation height (to the top of the arm) | （mm） | O | 3630 |
| Transportation height (to the top of the hose) | （mm） | P | 3720 |
| Transport length | （mm） | Q | 11380 |
| Transport width | （mm） | R | 3350 |
| Counterweight ground clearance | （mm） | S | 1250 |
| Total high (to the top of the cab) | （mm） | T | 3200 |
| Transit width | （mm） | U | 3155 |
| The height of the cab (above the platform) | （mm） | V | 835 |
| The cabinet is wide | （mm） | W | 1035 |
| Guide wheel and drive wheel center distance | （mm） | X | 4050 |
| Track length | （mm） | Y | 4975 |
| Total width | （mm） | Z | 3350 |
| Track width | （mm） | a | 600 |
| Track height | （mm） | b | 1135 |
| Minimum ground clearance | （mm） | c | 545 |
| The scope of work | |||
| Maximum digging distance | （mm） | A | 10845 |
| Maximum digging distance on ground | （mm） | B | 10635 |
| Digging depth | （mm） | C | 7135 |
| Maximum loading height | （mm） | D | 7180 |
| Minimum loading height | （mm） | E | 3095 |
| Digging height | （mm） | F | 10100 |
| Maximum height of bucket pin | （mm） | G | 8820 |
| Maximum vertical arm digging depth | （mm） | H | 3810 |
| Maximum vertical radius | （mm） | I | 9060 |
| 8 feet maximum digging depth on flat ground | （mm） | J | 6950 |
| 8 feet minimum digging radius on flat ground | （mm） | K | 3370 |
| Minimum digging distance | （mm） | L | 1830 |
| Minimum turning radius | （mm） | M | 4485 |
| Bucket extension angle | （mm） | d | 172 |
The above parameters are subject to change without notice as technology improves.
Recommended
products
If you are interested in our products please leave a
message.we will reply you as soon as we can.
CONTACT US
WhatsApp: 86 186-6007-5959
Email: james@yoohooglobal.com
Website: www.yoohooglobal.com
Address: No. 21 Yunlongshan Road, Fushan District, Yantai
City
Coryright ©
Yantai Yehong Construction Machinery Co., Ltd.
All Rights Reserved